Magnetics Calculators29 instruments

Force Between Parallel Wires

Attraction & repulsion of currents (the old ampere definition).

Fℓ=μ0I1I22πd\frac F\ell=\frac{\mu_0I_1I_2}{2\pi d}
Fig. 1 Currents in the same direction attract
d = 10 mmI₁ = 100 AI₂ = 100 Aattract
Fig. 2 Force per metre vs. separation
110010k0.0010.010.1110d (mm)|F/ℓ| (N/m)
F/ℓ
hover / touch plot to probe
Inputs drag, tap ± or type (SI suffixes ok: 4k7 → 4.7k)
A
A
mm
m
Results
Total force
200 mNattractive
Force per length F/ℓF/\ell
200 mN/m
Equivalent weight
20.4 mkg
BB from wire 1 at wire 2
2 mT
Fault currents of 20 kA in busbars 10 cm apart produce ≈ 800 N/m, which is why switchgear bars are rigidly braced.

§ How it works

Wire 1 creates a circular field B1=μ0I1/(2πd)B_1 = \mu_0 I_1/(2\pi d) at wire 2. Wire 2 carries current through that field and feels F=I2ℓ×B1\mathbf F = I_2\boldsymbol\ell\times\mathbf B_1:

Fℓ=μ0I1I22πd\frac{F}{\ell} = \frac{\mu_0 I_1 I_2}{2\pi d}

Parallel currents attract, antiparallel currents repel (the opposite of electric charges!). Until 2019 this was the definition of the ampere: the current that produces 2×10−72\times10^{-7} N/m between two infinitely long wires 1 m apart. Since the SI redefinition the ampere is fixed via the elementary charge, but μ0\mu_0 remains ≈4π×10−7\approx 4\pi\times10^{-7} H/m to within 10⁻¹⁰.

Assumes long, thin, straight conductors (ℓ≫d\ell \gg d). Use negative values to reverse a current.