Magnetics Calculators29 instruments

Force on a Conductor (BIL)

Lorentz force, Fleming’s rule and coil torque constant.

F=BIℓsin⁡θF=BI\ell\sin\theta
Fig. 1 Fleming's left-hand rule: field →, current ⊗, force ↑
NSF = 250 mNθ = 90° (top view)only the wire component perpendicular to B produces force
Fig. 2 Force vs. angle between conductor and field
05010015000.050.10.150.20.25θ (°)F (N)
F(θ)
hover / touch plot to probe
Inputs drag, tap ± or type (SI suffixes ok: 4k7 → 4.7k)
T
A
mm
°
mm
Results
Force FF
250 mNupward
Equivalent mass
25.5 mkg
Peak coil torque NBIℓwNBI\ell w
500 mN·m
Torque constant ktk_t
100 mN·m/A

§ How it works

The Lorentz force on every moving charge in a conductor adds up to a force on the wire itself:

F=I ℓ×B⇒∣F∣=BIℓsin⁡θ\mathbf F = I\,\boldsymbol\ell\times\mathbf B \quad\Rightarrow\quad |F| = B I \ell \sin\theta

Force is maximal when the conductor is perpendicular to the field and vanishes when parallel. Its direction follows the cross product, or Fleming's left-hand rule: First finger = Field, seCond = Current, thuMb = Motion.

A rectangular coil of NN turns has two active sides pushed in opposite directions, creating torque τ=NBIℓwsin⁡ϕ\tau = NBI\ell w\sin\phi, the basis of every DC motor and moving-coil meter. The torque constant kt=τ/Ik_t = \tau/I (N·m/A) numerically equals the back-EMF constantkek_e (V·s/rad).