§ How it works
Charles Steinmetz observed in 1892 that hysteresis loss in iron follows a power law. Generalised to include eddy-current and residual losses, the Steinmetz equation is
, and are fitted to the manufacturer's loss curves over a limited range of frequency, flux and temperature. Typically (1 = pure hysteresis, 2 = pure eddy currents) and . Here is in Hz and in tesla.
Because , halving the flux swing cuts loss by ~5.7×, which is why high-frequency designs run ferrites at only 50–150 mT. The equation assumes sinusoidal excitation; for PWM waveforms use the improved generalised Steinmetz equation (iGSE), which uses .